2pk Mi-Pods - Empty

Mi-Pod

2pk Mi-Pods - Empty

$10
Customer Group:
Color: Red Pod
Quantity:

 

Refillable

#RedPod

DIRECTIONS:

1 Remove the Silicone cover. Open the bottom cartridge filling port.

2 Inject directly into the chambered slot and closed filling port. Shake vigorously.

3 Put the filled cartridge into the Mi-pod body with the gold pins facing each other.

NOTES:
The 2mL cartridge can be filled up to 5 times.
The cartridge takes PG/ VG ratios 70/30, 60/40, 50/50 & Nic Salt
If you get air bubbles by your coil flip your pod upside down and shake it tell they go away.
The pod is compatible with all refill containers with a maximum spout diameter of 3mm.
DO NOT OVERFILL THE POD.
DO NOT GET E-LIQUID IN THE CENTER AIRFLOW.

#BlackPod

DIRECTIONS:

1 Remove the Silicone cover. Open the bottom cartridge filling port.

2 Inject directly into the chambered slot and closed filling port. Shake vigorously.

3 Put the filled cartridge into the Mi-pod body with the gold pins facing each other.

NOTES:
The 2mL cartridge can be filled up to 5 times.
The cartridge takes PG/ VG ratios 70/30, 60/40, 50/50 & Nic Salt
If you get air bubbles by your coil flip your pod upside down and shake it tell they go away.
The pod is compatible with all refill containers with a maximum spout diameter of 3mm.
DO NOT OVERFILL THE POD.
DO NOT GET E-LIQUID IN THE CENTER AIRFLOW.

Airflow

#RedPod

Included with each airflow card is two very small purple piece - these are airflow adjustment plugs. The Mi-Pod is designed to be able to both mouth-to-lung and direct-lung vape. However, if you want to make the airflow in your pods more restricted for a tighter draw, then simply insert the plug into the air intake hole (see image above). Make sure the plug is inserted with the air channel facing up like an upside down U and then push it in.

#BlackPod

Included with each airflow card is two very small purple piece - these are airflow adjustment plugs. The Mi-Pod is designed to be able to both mouth-to-lung and direct-lung vape. However, if you want to make the airflow in your pods more restricted for a tighter draw, then simply insert the plug into the air intake hole (see image above). Make sure the plug is inserted with the air channel facing up like an upside down U and then push it in.  

Product Help

#RedPod

 

Dry Hitting Pods

The world is full of many kinds of e-liquid.  Certain PG/VG (Propylene Glycol/Vegetable Glycerin)combinations in different ways (Normally, the ratio is on your E-Liquid label). Please be aware that juices that are higher in VG may need a little more wicking time than other juices in lower ratios, this may also cause your pod to last less than the recommended amount of time.

Mi-Pod Spit Back

WHEN REFILLING - Make sure not to force the bottle tip in so that it seals. If you do, the air has nowhere to go but out the coil. Tilt the pod at 45 degrees when filling and this should help.

 #BlackPod

 

Dry Hitting Pods

The world is full of many kinds of e-liquid.  Certain PG/VG (Propylene Glycol/Vegetable Glycerin)combinations in different ways (Normally, the ratio is on your E-Liquid label). Please be aware that juices that are higher in VG may need a little more wicking time than other juices in lower ratios, this may also cause your pod to last less than the recommended amount of time.

Mi-Pod Spit Back

WHEN REFILLING - Make sure not to force the bottle tip in so that it seals. If you do, the air has nowhere to go but out the coil. Tilt the pod at 45 degrees when filling and this should help.

 

 

 

Recently Viewed

express yourself