Make sure not to force the bottle tip in so that it seals. If you do, the air has nowhere to go but out the coil. Tilt the pod at 45 degrees when filling and this should help.
To fix this and get the vape juice cleared - Take the pod out of device, lightly cover the side-airflow with a napkin and carefully blow air through the mouth-tip the. The flooded juice will exit through the side of the pod, be careful as some juice may stain clothing. Then after a few puffs you should be good to go.
Unfortunately gravity is the issue. When upside down while vaping, the suction combined with vapor condensation will create drops of liquid that slowly pull juice past the cotton. Following our steps to fix flooded pods will remedy this, but it will not prevent it.
Find our archives of product troubleshooting articles, Mi-One Customer Care policies, and more on our Customer Support Center.
If your Mi-pod indication light is working but no vapor is coming out upon inhale/draw you are likely experiencing a connection issue. With some troubleshooting you can get your device working again.
Your device will do the following in this situation:
This issue can occur if the two-gold spring loaded contacts inside your device are not cleaned. Another possible reason can be the two gold contacts are pushed in a hair while in their packaging stopping the proper connection to take place inside of the device
Find our archives of product troubleshooting articles, Mi-One Customer Care policies, and more on our Customer Support Center.
Filling your thick oil Wi-Pod pods with even the thickest of distillates is simple. Let’s go over the few key steps that you will need to know.
]]>Our revolutionary thick oil vape device, the Wi-Pod thick oil vaporizer, has hit the market and is being received well from so many of you. This device was created to vape thick-oils and concentrates easily and on the go. The Wi-Pod is durable and features a convenient auto-draw activation that allows you to rip even the thickest of oils with ease.
Filling your thick oil vape pods with even the thickest of distillates is simple. Let’s go over the few key steps that you will need to know to fill your Wi-Pod properly and have the best possible thick oil vaping experience.
Our game changing green W pods are made from terpene resistant polymer and hold 1.1mL of oil. The Wi-Pod pods have a wide side filling port for easy filling. These pods also feature a patented dual airflow and ceramic core.
What you will need for filling:
Take your thick oil vape pods that you wish to fill and turn on its side. Unplug the silicone side tab and set the pod back down on it’s side.
Grab your syringe and find your heating device (Lighter, blow dryer, etc.), for this example we will be using a lighter to heat our oil. Heat your syringe with the lighter until the contents are visibly ‘runny’ or thin. Heating your syringe while pointed upwards helps to avoid spills. Your goal is to heat the oil to a viscosity/thickness that is like water, freely moving about inside your syringe.
Insert the tip of your syringe directly into the open filling port of the pod. Press down on your plunger and fill your pod to your preferences, up to 1.1mL. When you are done filling, allow the pod to sit with the silicone tab open for about 5 minutes to let air escape and the hot oil to cool off/settle. Rushing this process with warm oil can cause leaking/spitback, allow the pod to completely cool before plugging the silicone tab. After waiting for the pod to cool, close tab and insert your pod into the Wi-Pod device making sure to match pins to pins.
Make sure your Wi-Pod battery is turned on (3 quick clicks of the bottom button) and take a few very light puffs to saturate the pod at first. After the first few puffs, your Wi-Pod should be wicked and ready for use!
The Mi-Pod combines innovation, performance and fashion into an easy-to-use vaporizer. In order to treat yourself to the most enjoyable vaping experience ever, you will need to know how to fill the Mi-Pod replacement pods. Let’s go over the steps to filling your 2pk pods today.
Unlike most traditional vape pens, Mi-Pod uses refillable pods rather than replacement coils or disposable cartridges. Mi-Pod Replacement pods fit up to 2mL of E-liquid / Nic Salt, and last up to 5 refills (~10mL). Start setting up your pod by removing the silicone cover from your pod and set aside. At the bottom of your pod, pull the silicone plug from the filling port and turn your pod upside down. You are now ready to start filling your pod.
Grab your juice bottle and fill the pod from the bottom, through the filling port. We recommend Nic Salt E-Liquid for Mi-Pod Refillable Pods. These pods are also compatible with SubOhm E-Liquid. The 3mm opening should take most juice bottle-tips. With your pod upside, down tilt the pod at a 45 degree angle towards the cotton. With your bottle end inserted into the pod, begin to fill. Your goal is to make sure the cotton is saturated. (Tilting the pod ensures saturation, watch the e-liquid as it flows into the cotton) Continue to fill your pod but do not overfill. Do not get e-liquid into the center airflow.
Close the filling port and shake your pod vigorously so any possible air bubbles rise away from cotton. Stubborn bubbles can be moved by tapping the pod on a hard surface.
Insert your filled pod into the Mi-Pod device ensuring pins on bottom of pod align with pins in battery. Turn your device on with 5 rapid clicks on the power button. Be careful when using a freshly charged device, an improper pod can burn within seconds. Patience is key. Take a few short draws off your pod to prime. After priming your pod you are good to enjoy your Mi-Pod pod.